Mold Damage & Crawl Spaces
How Mold in Your Crawl Space Affects Your Home
Rot and mold in crawl spaces is a housing epidemic across the United States and Canada that, with a small investment, can be easily avoided.
Installing a crawl space vapor barrier system in your home will protect it from most of the common causes of rot, mold, damage, and humidity. Installation of this kind of system usually takes less than a day to complete.
At AquaGuard Foundation Solutions, we offer free crawl space repair quotes in Atlanta, Marietta, Decatur and the surrounding areas. Contact us today to schedule your appointment and prevent mold from growing in your crawl space.
What Causes Mold in a Crawl Space?
Mold loves dark spaces, unseasoned lumber, and high humidity levels. Because your crawl space is warmed by your home above it and the natural warmth of the ground below, it stays at about 50 °to 60 ° Fahrenheit all year long — an ideal temperature for mold to grow.
Practically speaking, mold spores are everywhere — no matter how clean your home is.
However, if these mold spores are exposed to oxygen, a relative humidity of 60% or higher, and temperatures of 40 ° Fahrenheit or higher, they have ideal conditions for growth. For rot and mold to grow on wood, the wood needs to have a moisture content of 20-29% or higher.
That’s why it’s important to prevent your crawl space from becoming an ideal place for mold growth.
When mold and rot are allowed to grow in a crawl space, they lead to health and structural problems that affect the entire home.
Crawl space vents allow humidity, rainwater, and pests into your home.
Sources of Moisture and Mold in a Crawl Space
Even in the case of dry rot, there will need to be a source of water nearby. This water can enter a crawl space through poorly designed downspouts or grading, through groundwater flooding, and/or through plumbing leaks.
Mold can also grow when there’s adequate moisture in the air in the form of humidity. This moisture commonly enters a crawl space as water vapor passing through the soil or concrete. In this case, concrete will wick water and through the ground and releases it into the air.
One of the most common and avoidable reasons for crawl space mold and rot, however, is crawl space vents. In the summer, these open vents let in the summer air, which is often loaded with humidity. As the air enters the crawl space, it quickly cools in this dark space. As air cools, it loses some of its ability to hold moisture, and the excess moisture is dropped on surfaces in your crawl space as condensation.
Over time, this condensation will saturate the wood in your crawl space, and mold will grow.
Still Believe Crawl Space Vents Prevent Mold?
Ask yourself these questions:
- Are my crawl space vents drying my home when it’s rainy, foggy, or damp outside?
- If crawl space vents work, why is my vented crawl space damp and rotting?
- When cold winter air is blowing through my vents in the winter, what’s happening to my furnace, hot air ducts, water heater, and hot water pipes? What is that costing me?
- Will my open crawl space vents keep out termites, ants, mice, and other pests?
Signs of Mold in a Crawl Space
Signs of mold in a crawl space are often evident without having to enter the crawl space at all. Because air moves upwards in a home as it’s heated, a vacuum is created that will pull air up through the crawl space through a process known as the “stack effect“. If your crawl space has mold, you will be able to tell — your house will smell musty, and you may even begin to feel and/or display symptoms of mold and dust mite allergies.
Additionally, as crawl spaces begin to rot and decay, the floor above will begin to sag, buckle, or become uneven. Doors may jam, mold may grow on first-floor carpeting, and, in the long run, the floor itself could actually collapse inwards.
In the crawl space itself, some mold warning signs include visible mold growth, musty odors, and discoloration and/or signs of water damage on the wood.
White, powdery substances on concrete walls is not likely to be mold itself, but it’s indicative of moisture passing through the walls and creating a humid environment. If there are moldy, musty odors, then mold will be somewhere.
Surface mold creates cosmetic discoloration only and can be cleaned off. Decay fungi (above) darkens and shrinks the wood while causing structural damage.
White, powdery substances on concrete walls are not likely to be mold, but these are indicative of moisture passing through the walls and creating a humid environment. If there are moldy, musty odors, then mold will be somewhere.
Types of Mold in Crawl Spaces
Mold and rot fungi can be classified in two ways: what grows on the surface, and what grows within the wood itself.
Surface mold fungi will cause cosmetic discoloration only, and it will not significantly damage the structural strength of the wood. This mold can simply be cleaned off the surface.
Decay fungi will darken and shrink the wood, leading to severe structural damage of the wood and the eventual crumbling and decomposition of the wood overall. Wood with decay fungi looks soggy and spongy. This cannot simply be cleaned off, and replacement of damaged wood may be necessary.
One other variety of wood-damaging fungi is dry rot, also known as brown rot and cubical rot. As displayed in the photo above, wood damage from this kind of rot is shown as deteriorating the wood into small squares or rectangles. Often mistaken for termite damage because of its appearance, this is an extremely damaging type of fungi.
Dry rot damage on wood. Notice the cube-shaped pieces flaking off the surface.
One other unique feature of dry rot is its ability to pull water from far-away water sources through “rhizomorphs.” Rhizomorphs can extend for as much as thirty feet, stretching across brick, concrete, mortar, and similar materials. In the case of Serpula lacrymans, water has been transported as much as three stories upwards!
Preventing & Eliminating Mold in a Crawl Space
Traditional methods of dealing with mold, such as bleach and water, do not provide a long-term solution for mold problems. These methods do not address rot damage or humidity issues that cause mold in the first place.
Mold will begin growing again in as little as 24-48 hours if the mold-growing environment is not changed. Dormant fungi can reactivate when dry, and infected wood becomes wet again.
The solution to crawl space mold and moisture is to seal the crawl space vents, install a plastic liner on the walls and floors, and dry the space with a self-draining dehumidifier. Otherwise, any repairs and mold remediation steps you take are a temporary fix only.
We offer free crawl space repair quotes in Georgia, including Lawrenceville, Alpharetta, Sandy Springs, Stone Mountain, Norcross, Athens, Gainesville, Roswell and many areas nearby. Contact us today to get started!
Some major cases of crawl space humidity stem from where your dryer vents end. If your dryer is sending air into your crawl space, it’s also sending a ton of humidity with it! This humidity is exactly what mold, rot, and mildew need to start thriving in your home. If your dryer is sending air into your crawl space, fix the problem right away!